Showing posts with label Cruising. Show all posts
Showing posts with label Cruising. Show all posts

March 19, 2024

The Care and Feeding of Your Dinghy Outboard


There is nothing quite so discouraging as finding your outboard motor won’t start after a period of non-usage, or even worse after arriving in a new port with the anticipation of dinghying ashore to do some exploring. We have all been there, cursing at our non-functioning motors as we slowly row off while our crew pretends they aren’t noticing.

Don’t be Fuelish

However, there are a few simple things you can do to avoid outboard despair. The basic requirements of any gasoline-powered internal combustion engine are clean fuel, clean air, and a good spark at the right interval. Of course, there are more nuances for each requirement, but begin with the basics.

A cardinal rule of purchasing gasoline is to do so at places that pump a lot of fuel. Obviously, for many cruisers that will be a marine fuel dock, but be wary! Smaller, sleepier marinas may not turn over their fuel supplies rapidly. As a general rule of thumb gasoline with ethanol can be stored safely for up to three months without significant deterioration, and non-ethanol gasoline up to six months. I was a member of a small yacht club once that received only one or two loads of fuel for each six-month season (in the Northeast), and they only sold ethanol gas. Needless to say, I didn’t purchase gasoline from the club after a long winter of sitting in the ground.

For outboard gas often the best and cheapest way to purchase it is at a regular gas station ashore where you can easily observe the rapid turnover assuring fresh fuel. In addition, the major oil company brands have strict storage guidelines for fuel that might not be as carefully followed at smaller mom-and-pop marinas. I only purchase Top Tier automotive gasoline brands whenever possible. These are companies that guarantee a higher level of additives that promote cleaner burning. Go to toptiergas.com to learn more. In New England, where my boat is currently based, numerous gas stations feature TopTier brands including Sunoco, Mobil, Shell, and others.

In addition, you will see some marinas advertise specific additives at the pump, like ValvTect, for example. If the marina is busy, pumps lots of fuel, and is also ValvTect branded it will be superior to what you’ll get at a sleepy fuel dock with no branding. Marinas have to maintain certain standards to be able to display the branding, and the additives are probably helpful.

You may have heard many people say that all gasoline comes from the same terminals so there is no difference between the cheap off-brands and the name brands. Unfortunately, this is not the whole story. Yes, a tanker truck may fill up with gasoline that then is delivered to several different stations, including your marina, but name brands all have their own blend of additives that can make a difference in performance. It is my understanding that if you see a name brand on the sign, the gas in the ground will have their additive package.

Storage 

When long-distance cruising you may be limited in your choice of where gasoline can be purchased, but there will almost always be local fishermen about. Observe or ask where they get their gas. Their livelihoods (and their lives!) depend on proper functioning of their motors, and you can be sure they know where the gas is good. I have even purchased gasoline and diesel direct from fishing boats when there were no other alternatives. Good old U.S. dollars tend to be welcomed anywhere.

Cruisers who spend some time in the area are also great sources of information. Sometimes there just isn’t a good place to get gasoline, so carry plenty of spare fuel in proper storage containers. If forced to purchase gasoline of suspect origins I like to pump a bit into a glass jar first. Let it settle for a few minutes to see if there is observable crud or water in the gas. There are funnels with filters in them, but I have found in use the fuel flow is too slow to be practical. When in doubt, don’t use the gasoline. I would rather row ashore than risk damaging my engine.

I personally prefer to use proper plastic fuel jugs using the universal color scheme of red for gasoline, yellow for diesel, and blue for water. Even if you don’t make mistakes, someone else handling your cans might! Write your name or your boat name on the jugs. If a jug is for a 2-stroke I label it so I don’t mix it up with straight gasoline. In addition, I always go through a rather formal ritual when at a fuel dock to make sure I am getting the fuel I want. Hoses can get crossed easily, nozzles can look alike, and attendants can make mistakes. If I am handed a fuel nozzle I always ask, “This is gasoline, correct?” I also try to track the hose back to the pump just to make sure, and I pump my own gas whenever possible.

Tip over the nozzle and let whatever is in there drip out before inserting it into your gas can or tank fill opening. There should only be a tiny amount of gas in the nozzle, usually a few drops or less, but I have had the unpleasant surprise of a gush of water mixed with fuel pour out from a nozzle left in the rain unprotected. Water in your gasoline is the major problem leading to a non-starting situation. I’ll write more about that later.

Some time ago environmental regulations mandated non-venting fuel jugs, which required special spigots with valves that were often hard to use and resulted in lots of fuel spillage in use. However, I have found the current generation of non-venting jugs is far superior to the early ones that generated a lot of bad stories. Do yourself a favor if you haven’t purchased jugs in a few years and get some new ones. They are far superior to ones available even just five years ago. 

Plastic fuel jugs have limited lifespans, especially on boats in the tropics where the sun will speed up deterioration. Unfortunately, on most boats there is no safe place to store gasoline other than on deck in jugs, often lashed to the lifelines. On our 38-foot boat traveling to the southwest Caribbean we found that two 5-gallon jugs plus the 3-gallon outboard fuel tank were sufficient for our needs with an 8HP 2-stroke outboard pushing a 10-foot inflatable. Many people today are using 4-stroke outboards, which in my experience burn half as much as older 2-strokes.

It is not uncommon to see experienced cruisers utilize dedicated fuel jug and tank covers made of sun-resistant cloth. Personally, I have never done so, and I find that plastic jugs are good for at least four or five years, even in the tropics. Often by that time one or more of the spigots is in need of replacement anyway, and I find replacing a couple of jugs not a major expense. However, covering the tank that lives in your dinghy might be worthwhile since its failure in some out-of-the-way place could be very unpleasant. One backup that must be carried is a complete fuel hose with bulb as those do regularly rot out in the sun, and again could mean a total no-go situation if not working.

Maintain Stability

With either 2- or 4-stroke motors the first thing that goes into any empty gas jug is the appropriate amount of Sta-Bil 360 Marine (the blue stuff) fuel stabilizer. I never run untreated gasoline, and I have been using this company’s products for decades in my outboards, my motorcycle, and my snowblower. Sta-Bil allows you to store fuel for up to a claimed 12 months, and I have even used two-year-old gasoline in my outboard with no ill effects. Living in the Northeast, I bring my outboard gas home in the winter for use in my snowblower. If any is left in the spring I put it in my car. Do not do this if your outboard fuel has 2-stroke oil in it! Excess oil can damage your catalytic converter, but stabilzer in the fuel is fine. Obviously, there are other products on the market, but I have had great results using Sta-Bil.

Sta-Bil also claims that the product reduces problems with ethanol gasoline, but your biggest worry there is keeping water out of the gasoline in the first place. Many people complain about problems with ethanol gas because ethanol bonds with the water causing something called “phase separation.” Essentially, you end up with gunk on the bottom of your tank made up of ethanol and water with gasoline on top. The motor sucks up the gunk and you have a dead motor, and if you leave it in your carburetor it causes corrosion that can plug everything up. If you open up your carburetor and it is full of green gunk it is probably due to water in the gas combining with the ethanol. The green color is due to corrosion of the carb. Sta-Bil helps prevent corrosion too.

Needless to say, this situation must be taken care of. You’ll have to clean or replace any fuel filters. Soaking your carburetor parts in gasoline can do the trick, and I find blasting some WD-40 through the tiny jets can be the easy way to clear them. Four-stroke motors burn very little gas, especially at idle, so the low-speed carburetor jet has a really, really tiny hole to let through small amounts of fuel. The teensiest piece of crud can plug that jet, making the engine hard or impossible to start. On a couple of motors I figured out how to bypass the stop that prevented starting the engine at high throttle settings, meaning the high speed jet was in use and I could start the engine with a tremendous roar. That’s a temporary measure, so learn how to remove your carb and clean it! 

The carb is the part on your motor that both stops you from going, and is the likely culprit for poor running once started. Most modern outboards have very reliable sealed electronic ignition components, and they either work or need to be replaced. Look to the fuel system first if your motor isn’t working right. It is even desirable to carry a complete replacement carb onboard, since you will have to service the on-engine unit at some point. It is easier to swap in the spare, then clean the other unit at your leisure.

Adding an inline fuel filter can make a big difference in preventing crud reaching the engine in the first place, and even better is mounting a fuel/water separator spin-on filter on the inside of the transom. Luckily, carburetors are gradually disappearing and there are many larger engines with Electronic Fuel Injection (EFI). We’re gradually seeing EFI migrate down to dinghy-sized motors too, and by all accounts these engines suffer from many fewer fueling problems. However, the beauty of an old-school carb is that it is a purely mechanical device that can be serviced and replaced almost anywhere in the world. EFI systems are computer controlled, with all the advantages and disadvantages of modern digital systems. The main disadvantage is that troubleshooting and repair (often just replacement) is limited to dealerships with the right equipment.

The most important thing for your fuel system is to keep water and crud out in the first place! Assuming you’ve purchased clean gas, make sure to only store it in dedicated fuel jugs that seal perfectly–no loose lids or exposed openings! To keep the water out I’ve found the new non-venting jugs are far superior to older jugs with air vents that always broke or popped open.

Be sure to close any air vent on your outboard tank left in the dinghy, and also the air vent on motors with internal tanks. I close these vents immediately after I shut down the motor for even the shortest run. Also, never leave the tank in a dinghy that might be unattended for a long period. After periods of heavy rain I always see gas tanks floating around in dinghies, sometimes upside down or even held under water by something. A friend used to leave his tank in his dink no matter what. One day I saw him on the dock wondering why his motor wouldn’t start. After much futzing with the motor I drained his carb and observed mostly water emerging. I took a look at his gas tank, which had probably a quart of water in the bottom!

Obviously, 2-stroke motors will need the proper amount of the proper 2-stroke oil added, and I put it into the jug along with the Sta-Bil when empty. In other words, no jug goes to the fuel dock without 2-stroke oil and Sta-Bil. Two-stroke oil also acts as a stabilizer, but I have always used both products together with perfect results after storing fuel for long periods. Since you will be dead in the water without 2-stroke oil, be sure to carry plenty. You can’t always count on it being available, though there will usually be another boater around who could lend you some in a pinch. Again, ask a local fisherman if you need to find some.

Essentials

Fuel integrity will prevent a lot of outboard problems, but not all. Every cruiser needs to bring along certain essential spare parts, in addition to the already mentioned fuel hose with fittings. Number one would be multiples of the correct spark plugs for your motor. Two-stroke motors go through plugs faster, and in the past I used to carry at least a couple of spares right in the dinghy along with maybe 6 or 8 changes onboard the mothership. Four-strokes do not burn oil if they are working properly, and that avoids a lot of plug fouling. However, you should always carry at least a couple of spark plug changes worth of spares. I change them at least once a year. 

It is worthwhile pulling off the spark plug wires on a new-to-you motor and applying a touch of dielectric grease to the inside of the rubber boot where it will contact the plug. This helps prevent the rubber boot from sticking to the spark plug. Dielectric grease is not conductive, so keep it away from the metal tip of the plug and the metal socket within the rubber boot to avoid adding electrical resistance. 

It is a good idea to back out your spark plugs at least once a year or so and take a look at them, even if you don’t replace them. This also guarantees that the plugs don’t get frozen into the head. After I torque the plugs back in I spray some lubricant in around the base of the plug to help prevent corrosion. It is advisable to back out and lubricate lots of exterior bolts and screws on the motor. For example, the lower-unit drain bolts should be backed out and lubricated with a waterproof grease at least once a year, or when the lower-unit oil is changed. And, that particular oil is another spare to carry. I also put a waterproof grease on the transom bracket bolts and adjustments. Green Grease works well, but waterproof wheel bearing grease is also good.

Four-stroke motors will require the periodic changing of the crankcase oil, and again carry spares for at least two changes. Though not what your factory outboard handbook recommends, I have found that ordinary automotive synthetic motor oil performs the best over the long term, and you do not have to pay a premium for the outboard name brand. The main criteria to match is the required motor oil weight, such as 10W-30 or 10W-40. Yes, there are marine-specific brands that cost a lot at a marine store, but I am not convinced an oil that is approved for your $50K car (of the proper weight) would not be just as good, and it will be a fraction of the price at an auto parts store. There is nothing going on inside a 4-stroke outboard motor that makes the engine innards any different than the workings of a motorcycle, car, or snowblower.

It’s not everyone’s favorite product, but I find a general spray down with WD-40 all over the engine under the outboard cover does help prevent corrosion. There are other marine-specific general spray lubricants that may or may not be better, but I like the fact WD-40 does not leave a lot of residue behind. I have done this for decades and it helped keep a 9.9HP Yamaha going for 12 years pushing around a 32-foot catamaran, and I recently retired a 15-year-old Johnson 8HP 2-stroke that was used heavily. Both motors were running perfectly when either sold or given away. I find that WD-40 does not harm the wires or electrical components. While inside the engine cover, pay particular attention to any moving cables, rods, levers, and gears that control things like the throttle or gear position. Contact points may require a little grease–I find that lower unit grease in the tube is perfect for this, or use the Green Grease you use for the transom bracket bolts.

By observing fuel integrity, corrosion prevention, and basic maintenance you should get many years, even decades, of reliable use from your dinghy outboard.

This article was originally published by Ocean Navigator magazine.

https://oceannavigator.com/article/the-care-and-feeding-of-your-dinghy-outboard/

September 25, 2023

It's you, not your anchor


We all have a tendency to blame the hammer when we hit our thumbs. It's the same with anchors. You sail into a beautiful but crowded harbor, drop the hook while looking forward to celebrating with an evening cocktail, only to find the darn thing isn't holding and instead of that Marguerita you get to look forward to pulling on a mucky chain. Sometimes this process is repeated several times until something goes right and you have a solid bite, or you give up and look for a mooring.

Since I've been anchoring cruising boats for close to half a century I've had many moments of reflection around this problem. Perusing several online cruising forums, I am not alone in pondering why an anchor works sometimes and not others.

Yes, there are elements of luck at play here. For example, we once dropped our hook into a deep hole in the middle of Annapolis Harbor and sat like on a heavy mooring while boats dragged all around us in some severe squalls. On the other side of the coin, we once were dragging our anchor merrily through Newport harbor in a modest bit of wind. When we pulled it up the anchor was firmly wedged in a lobster trap that was not generating much holding power.

Then there are bottom types that are not conducive to a good night's sleep, like the jelly like ooze found up creeks in the Chesapeake. No matter how much you back down on your anchor it just drags through the ooze. Or, the runway like bottom we encountered when anchored off of Tulum in Mexico. I spent an hour walking anchors around on the bottom trying to stick each point into any tiny indentation in the bottom. We spent a restless night hanging on three anchors and as much chain as I dared put out, and it was mostly just the weight holding us in place.

But, more often than not what I see is abundant evidence that we are actually doing something wrong when the anchor doesn't hold. I'm not talking about hurricane conditions. Most of the dragging I have observed has been during normal blows, like thunderstorms, frontal passages, or sometimes just a freshening breeze.

The first piece of evidence for our fallible nature has been observed on my own boat more than once. We drop the hook, it doesn't hold, then we redrop more carefully and all is good through whatever winds come along.

The second piece of evidence is observing this exact same thing on many hundreds of boats on many more nights all around me. Two boats come in to anchor. They both have the same anchor. One holds, the other doesn't. 

The third piece of evidence is observing how people drop their hooks, including on my own boat. When we first got our Mantus we eagerly dropped it in one of our favorite spots where I know the bottom like I do my own. We proceeded to drag that thing all over the place as we backed down. My first thought was, "So much for these so-called "New-Gen" anchors!" But, after pulling the anchor up it was obviously fouled with our own chain wrapped around one of the ears supporting the hoop. Thinking back to the anchor drop we had dumped a bunch of chain way too fast and right on top of the anchor because I had left the anchor brake way too loose. We proceeded to back down and the pile of chain just wrapped up the anchor.

Other times when we have dragged our initial set I have rechecked my scope and realized that I didn't have enough chain out. This is easy to do in a crowded harbor where you are trying to fit in between other boats already at anchor. Another bad move is to try and anchor in a known weedy area, only to fail to hold while cursing the anchor that comes up with a giant ball of grass.

The big problems I see regularly were listed in the previous post here, along with my prescription for doing it right. 

My final piece of evidence for this problem is mostly in the past when we anchored everywhere from Labrador to the Caribbean without the benefit of New-Gen anchors, all-chain rode, windlasses, or scientific anchor testing. We used steel Danforths, CQRs, Bruces, and the occasional fisherman pattern anchor, and we did it successfully in the same places we are struggling with anchors today that have been tested to provide much greater holding power. Yes, the New-Gen anchors set easier and better, and have greater holding power, but it is really overkill in most situations. I've rode out full gales on both generations of anchors in the same location. I see people today doing the same who haven't bothered to change to a New-Gen anchor for some reason. Just the other day I was anchored close to a group that included CQRs, a Bruce, a Spade, a Danforth and some Rocnas. It was the Rocnas that dragged for some reason.

Using these new wonderful tools has spoiled us to the point we expect them to just work no matter what we do. Dump them over the side on all-chain rodes, then break out of the cocktails! Unfortunately, it is not that simple. Before blaming your tools make sure you are using them properly!

See the previous post.

August 29, 2023

Cuttyhunk anchoring thoughts


This summer we spent a significant amount of time anchored in Cuttyhunk Pond, one of our favorite spots. We've been anchoring there for more than 40 years so I know it very well. The anchorage in the Pond has a reputation for being crowded and with poor holding, but we have found out over many years there is almost always room for one more boat! 

The reputation for poor holding is well-deserved if you drop the hook in the wrong part of the Pond. Many areas are very grassy, to the point that some people can never get an anchor to hold. However, the main portion of the dredged basin, northeast of the mooring field, has good holding in mostly mud. We've rode out gales there and numerous thunderstorm gusts.

This post will not go into all the nuances of anchoring in Cuttyhunk, but instead is a collection of random thoughts collected while observing numerous boats anchoring in all weather. For further thoughts on Cuttyhunk anchoring just use the search function.

1. Lots of boats don't even consider anchoring in Cuttyhunk Pond. I see them every day circling around the mooring field searching for an available mooring. If the search fails they often head outside to search for a rental mooring in the outer anchorage. Many, if not most, of these boats sports a decent looking anchor on the bow that presumably is connected to a decent anchor rode, but they just don't want to use the gear. Is this because they perceive the anchorage as too crowded? Sometimes, but on other days I have observed this same behavior when I am the only boat at anchor. In our more than 40 years of visiting Cuttyhunk the only time I used a rental mooring is during Hurricane Bob, but I backed it up with multiple anchors on long rodes. Apparently anchoring is becoming something that people don't want to do.

2. I've carefully observed hundreds of other boats pulling or dropping anchors before and after dragging in a blow, and I can make the following observations about anchors. Without a doubt the new-gen anchors with rollbars perform the best and are least likely to drag. We've been using a Mantus since they first came out and it has never failed us. Danforth-type anchors and Fortresses seem to mostly be used by power boats these days, but once in awhile I see a sailboat using one. If they get it dug in and back down hard, no problem. But, sudden wind shifts often dislodge the Danforth-types. There are lots of CQR and Delta anchors still in use, and in calm weather they seem fine. Many survive big blows, but I have also seen a lot of draggers using them. If I see a Bruce or claw-type anchor going down I become very wary of that boat--lots of draggers use those. Various other anchors seem to have mixed performance. The other night a traditional schooner came in, casually threw a Spade anchor on all-nylon rode over the side, anchored in a bad spot close to the moorings, and then proceeded to ride out several blows that sent other boats dragging. On the other hand, I have noticed more than once Spades being pulled up by dragging boats, and inevitably the entire scoop is one big ball of mud and weeds.

3. The #1 problem I see every day is the use of too little anchor rode. Boats come in, let out some chain and sometimes line, then start to back down hard on what is obviously too short a scope--you can tell by the angle the rode makes as the boat slides backwards. Other times, they don't bother to back down at all. Even if you feel it is too crowded to lie to traditional (and safe) 5:1 scope I find that most anchors require at least that much to set properly. Once you've set the anchor hard with the engine, and there is no perceptible dragging, then you can shorten up to as little as 3:1 if you are using an all-chain rode. Just be prepared to let out more if the wind picks up, which it often does at 2am!

4. The #2 problem is dropping the hook in one of the weedy areas outside of the dredged square on the chart. This is done mostly by smaller power craft, but sometimes tried by big cruising cats too. It often takes multiple tries to dig down through the weed in those spots, and with each try the anchor comes up completely fouled with weed. People with power windlasses controlled from the cockpit sometimes have no idea why their anchor is dragging after multiple tries. Check your anchor visually if for some reason it doesn't hold! We have occasionally found upon inspection that we somehow fouled our own anchor with our anchor chain after spinning around and around it in light winds.

5. This last point has to do with these light winds likely to be encountered during lazy summer sailing. Sure, your anchor has been holding great on short scope for a few days, but consider resetting it if a big blow is predicted. This is particularly important if a dramatic wind shift will occur. An anchor that held well in light air from the southwest may not be well positioned to pivot and re-dig in when the 2am blast comes in from the northeast. You may also want to consider putting out a second anchor in these situations, but you have to be careful in a crowded anchorage not to limit your swinging in such a way that other boats on one anchor will swing into you. If when anchored in the prevailing wind your stern is close to the shallows, it is probably safe to consider putting out a second anchor on those shallows. When the wind swings around to come from the direction of the shallows you will stay in place while everyone else on single anchors moves away from you.

July 26, 2023

Juggling All the Variables


Certain harbors are gathering places for sailors headed offshore. Back in the good old days I met a lot of fellow cruisers while arguing about the weather as we holed up waiting for a weather window to jump offshore. The sources of information were few — pretty much everyone shared the same data. Here in the USA the main sources were NOAA Coastal, Offshore, and High Seas text forecasts, gathered by weather fax, VHF and SSB radio. Sometimes we downloaded small-scale (large area) weather maps that gave us very general information on huge areas of ocean. And sometimes we just walked up to the weather station, as in Bermuda. 

Offshore, many of us didn’t get further updates, except possibly some scratchy voice forecasts via SSB radio. We usually sailed with three or four days of good predicted weather, after which we took what we got. Forget trying to predict the weather in segments smaller than 100 miles. Ocean current predictions were just general averages.

There were a lot of little things we did to supplement forecasts. We would wait in harbor until the wind clocked around after a front. A thermometer would tell when we had reached the Gulf Stream. A change in swell patterns might tell of an approaching storm. A certain ocean color and a type of seaweed indicated you were in the Gulf Stream. Or, you could spot the stream miles off by the line of clouds and thunderstorms down the middle.

Sounds pretty primitive, but all of these seat-of-the-pants methods, in conjunction with historical weather and route information summarized on the pilot charts, worked quite well. Still, I would argue that choosing the right route in the right season remains the single best weather decision you can make.

Taking into consideration not only the wind, but the currents, the speed of your boat, your planned times of departure and arrival, can be confusing. Wouldn’t it be nice to read a general forecast for a large ocean segment, hundreds of miles on a side, and  a weather map with winds and currents for that patch? What if you could take into account other variables and automatically get a plan for best departure and arrival times, along with the route to take for the most comfortable passage?

There’s an app for that

The digital revolution has brought us an era where we not only have 10 to 14 days of coastal weather predictions served to us via the internet. Many voyagers continue to enjoy these benefits when offshore by utilizing weather apps, satellite internet connections, and high-resolution displays, from phones, laptops, dedicated chart plotters and large monitors. Resolution is such that you can download predictions for your patch of ocean, including ocean currents. The addition of near-real time ocean current information is a huge leap forward, and makes for a much speedier and more comfortable trip.

To read the rest of this article check out Ocean Navigator!

Smartphone photography onboard

Like most cruisers today I carry and rely on a smartphone for many things: email, maps, weather radar, even phone calls (Google it)! However, as someone who enjoys photography, and as someone who frequently sells illustrated articles accompanied by photographs, I have learned both the pluses and minuses of smartphone photography onboard.

The biggest plus is of course that "the best camera you own is the one you have with you." When a great photo presents itself you don't want to be regretting you left your DSLR and its heavy bag back on the boat. Since many of us feel naked without a smartphone, we tend to carry one wherever whenever. This means you won't miss that shot of the amazing sunset, or the funny looking dinghy at the dock, or the cute town ashore. You will have both your phone and your camera with you almost all the time.

I have benefited from this availability many times, and can bitterly remember many missed scenes from the past when all I had were big, bulky, expensive cameras that were likely to be buried in a protective case stored in a locker down below when you saw the scene of a lifetime. Those of us old enough to remember film cameras of the past used to remark that a sure way to encounter a Pulitzer Prize-winning scene was to leave your camera behind, or to be changing your film.

With digital cameras we don't have to worry about changing film, or running out of film, which was worse. However, the smartphone in your pocket is not always the ideal instrument to capture the scene. One huge disadvantage is also an advantage in certain situations. Most phones today have big, beautiful screens that allow for great compositions, if you can see something. Unfortunately, bright sun, shadows, glare, and polarized sunglasses mean that we are often taking photos using the crudest point-and-shoot technique--point the phone in the general direction of the scene and hope you've captured what you want. In those situations take lots of photos to make sure that something is usable.

I find that many boating photos on the water suffer from this problem. Even on days without bright, full sun there can be so much light and glare that using a smartphone screen is nearly impossible. You might be able to see something on the screen if you shadow it, or point the phone in a different direction, but then you're facing the wrong way to get the shot. The bright environment means the photographer only has a vague idea of what she is pointing at, and careful composition relies on cropping the scene later. Take lots of extra photos!

It's a Big Wide World

There's good news and bad news with regard to composition. Smartphones have wideangle lenses, often equivalent to around a 28mm lens for those of you who used 35mm film equipment. Wideangle is great for some things--not so great for others. Typically, a wideangle lens is great for onboard shots illustrating what it is like on deck or down below. But, try to capture that lighthouse you are sailing close to and it will look like you were miles offshore. In general, smartphones are not good for photographing other boats from your boat, or even most scenics, unless there is something really big and really close to your boat.

I have made some interesting shots underway, but most include my own boat in the scene. For example, a wideangle lens can work for sunsets over the deck, or when passing through a big opening bridge that looms over the boat, or when shooting the wide expanse of a crowded mooring field full of boats.

Wideangle lenses are of greater use ashore when looking for telling details: flowers, brickwork, door knockers, etc. But, you have to get really close to fill the frame. They are great for wide streetscapes with lots of buildings and people. You have to be careful with closeups of people because the wideangle will distort faces, making for big noses and goggly eyes. Typically, portrait photographers utilize slightly longish lenses in order to be able to stand a bit further away from a subject and to flatten features, which in most cases is more flattering. Watch out with wideangle lenses not to shoot up at people from close range, which can make for some silly looks. Try keeping the smartphone camera on the same plan as the other person's eyes, or be slightly above them looking down. Again, if you are a lot taller than the other person, or are shooting down at them, you get more distorted looks.

One huge bonus with many phones is that they are easy to hold still and don't create any vibration to mar the shot, while also utilizing digital and other stabilization technology. This means you can take photos in dim light without the use of a tripod, and the best smartphones do a pretty good job of it. Cheaper phones tend to boost ISO (a measure of sensitivity to light) in low light, which results in the equivalent of "grain" that we used to see using fast film. This digital "noise" is not liked by most people, though I have seen some photos that use it to good effect. However, in general, with a top-level smartphone camera, you will find many night scenes come out very nicely. For extra stability try leaning against a light pole, or physically hold your camera still against a wall or table. With some cameras the stabilization technology is so good you can take handheld shots onboard in very dark situations. Try out photography at night with your phone and find out what it can do.

October 29, 2022

Get Out of the Marina!


The post mortems are coming in for Hurricane Ian, and from a boating perspective the lessons are clear. Get well out of the path, if at all possible, and secure your boat well away from others and on a mooring or anchors. The many scenes of wrecked marinas clogged with sunken boats perfectly illustrate the problem with relying on fixed docks. Very few marinas are designed to handle storm surges of 10-15 feet above normal high tides, and even if they are you are completely at the mercy of how well the boats around you are tied up. Once one goes the domino effect takes over.

However, a well-designed mooring and/or anchor setup can easily manage the storm surge if anticipated. Extra scope will be needed, along with extra lines and chafing gear, but I would much rather have my boat pointed into the wind and secured by the strongest cleats and lines from the bow. Pointing into the wind will vastly reduce the strain on everything.

Of course, this assumes you have a mooring or anchors with sufficient holding power. Typical mushroom anchor moorings or heavy blocks, as are frequently used, are not up to the task unless they are deeply buried in thick mud. With a sandy bottom, that is unlikely. Helical screw type moorings can provide the needed holding power, and these are available in places in Florida like Boot Key Harbor on Marathon in the Keys. By all accounts, the moorings there have held through hurricanes, with the weak link being the lines securing the boat. Usually, line failure is due to chafe onboard.

In major hurricanes it is wise to also put out your best anchors in support of your mooring. In Hurricane Bob we put out two Fortress anchors to help the two-ton mooring block we were on. The anchors were easy to set from the dinghy using long lengths of nylon line, and after the storm it took me most of the day to winch them out of the muddy bottom. Judging from how hard they were buried, both anchors provided significant holding power to the mooring rig. During the same storm many moorings were dragged ashore, in most cases due to insufficient scope added for the storm surge. However, many typical moorings are not well buried, undersized, and may not be in the best bottom for holding power. Unfortunately, harbor regulations often guarantee moorings are not well buried, due to frequent inspections that necessitate pulling the mooring completely out.

It is the topic of another post, but I have had complete success using large diameter PVC water tubing slid over mooring lines. Some reports indicate a possible problem with lines overheating and failing when encased in PVC, but I have not seen evidence of this after several hurricanes, a few tornadoes, and numerous gales. Other people have used and prefer sliding tubular nylon over your mooring/anchor lines. I too have tried this and it works well under ordinary storm conditions, though I believe the PVC provides the ultimate protection.

Another problem is how to best route the lines to your boat so that they contact as few points as possible to avoid chafe in the first place. Anchor rollers on bowsprits are vulnerable to being leveraged down or up and off. Plus, bobstays can act like hacksaws on your lines. Personally, I like multiple lines leading direct to deck-edge cleats or over smooth surfaces to cleats. Anchor rollers can work if very short and mostly on deck, and of course securely bolted down. Keep in mind that your boat's bow may be pitching down as well as up! In other words, don't depend on a downward pull on the line to keep it within an anchor roller. There must be something to prevent the line from being pulled up and out of the roller. On our boat I have also installed a bow eye near the waterline as an additional strong point.

It is a good idea to try to balance the strain by using multiple lines to the anchors and moorings, and then run lines from one cleat to another, if possible. In some cases, it might make sense to run lines back to mid-deck cleats or possibly the mast, if keel stepped.

Note I haven't mentioned the use of chain. It should not meet your deck under strain! In other words, make sure all chain is overboard with long lengths of nylon line leading back to the boat, or use long and very strong nylon snubber lines. Some friends once had their anchor chain jump the roller in a storm, and it began to saw down through the deck and hull as the boat pitched. The skipper was badly injured while trying to get the chain back into the roller.

So, how much wind can a good mooring/anchor setup take? During Bob, as described above, winds reached around 100mph with a storm surge of over 6 feet. Where we were only three boats broke free from their moorings: two were due to chafe and the third boat pulled the mooring straight up and floated with it to shore. Put out plenty of scope! Winds of 150mph with 10-15 feet of storm surge are another matter, but some moorings in Ft. Myers Beach did hold despite the vast damage there. I look forward to learning more about what happened to moored vessels there, in Punta Gorda, and in the Keys. I suspect that very few boats would have deck gear able to withstand the strain of Hurricane Ian winds, which is why running away is so important in the first place. But, if you can't escape the path, get out of the marina!

October 8, 2022

Hurricane Respect

A lot of people in Southwest Florida recently learned a hard lesson when Hurricane Ian slammed into the Punta Gorda/Sanibel/Fort Myers area with winds of 150mph and a storm surge that may have reached more than 10 feet in some areas. The cleanup is ongoing and the death toll is way past 100 and climbing.

Stories are beginning to emerge of intrepid and/or stupid boaters who survived the storm, or not, onboard. Most of the ones I have read conclude with an admission from the boater that it was a mistake to stay onboard and they had no intention of ever doing it again.

Along with these harrowing tales we are also starting to see many uninformed people blaming the National Hurricane Center (NHC) for its forecasts, which in reality were excellent as usual. Yes, the storm track moved slightly to the south and east in the last few days, and yes it didn't slam directly into Tampa Bay, but Fort Myers was always within the warning cone. Anyone checking official NHC information regularly should have been abundantly aware that even if the storm had tracked more to the north the Fort Myers area would have dangerous impacts.

Read the disclaimer on the warning cone page: Note: The cone contains the probable path of the storm center but does not show the size of the storm. Hazardous conditions can occur outside of the cone.

Even those who had not been paying attention until the last minute would have had 24 hours or more to prepare. In the case of boaters, that would have been enough time to move up the Caloosahatchie River into the Okeechobee Waterway. Once inside the Franklin lock you would have been protected from the worst of the storm surge. Even though extreme winds and flooding were experienced along the waterway, it was a much better place to be than exposed at Fort Myers Beach, Cape Coral, or Punta Gorda.

Every cruising boater should be monitoring the National Hurricane Center at least daily during Hurricane Season!

But, cruising boaters shouldn't have been anywhere near Fort Myers in the first place! Read my old post: Get Out of the Box. And, despite the endless repetition of the recommendation to, "Follow the advice of local officials," every cruiser should be collecting their own information and making sound judgments for their own boat and situation.

I have written a lot about hurricanes in the past. Just type "hurricane" in the search box.

February 3, 2022

Make Yourself a Round Peg



A never-old topic among liveaboard and fulltime cruisers is what to do about receiving mail, and along with that where to be "domiciled." The latter term is important and it differs from where you are a "resident" in important ways. Your domicile is where you consider your one and true home and where you intend on returning to after your travels.

I know, you don't intend on ever going back to land, but to exist in the real world of bureaucrats, tax collectors, and departments of motor vehicles you need to declare someplace on land as your domicile. I can just imagine some reading this grumbling about faceless bureaucrats and where they can shove their tax forms, but you simply can't fight this war and win. You will be pigeon-holed by the government even if they have to jam your square peg into a round hole against your will. I believe that most will be much happier in the long run if they round off their square corners in order to fit into the appropriate round holes unless you enjoy endlessly wrangling with bureaucrats, paying fines, and looking over your shoulder for the local sheriff.

By making your strange life as a fulltime cruiser look like anyone else's life when viewed from the office buildings in Washington, state capitols, and local government offices you will make your life much easier. Creating or maintaining a normal looking domicile is one key factor in doing this. Lots of mail forwarding services offer real street addresses that at first glance appear to offer the possibility of giving you something that looks like a real domicile, but they don't. The government and every financial service now requires you to prove your actual residential street address to access many services, like banking, driver's licenses, healthcare, etc. Almost everyone wants to have a driver's license, and in the USA the Real ID act means you must provide multiple proofs of a residential street address somewhere. In most cases they will not accept a commercial address like a UPS store, a mail forwarding company, or a Post Office box.

Since you will be on the move a lot you have no doubt thought about using a mail forwarding service. Many of these now offer mail scanning so you can review what has come in and decide what can be recycled, what needs to be forwarded, and maybe have a few things opened and scanned so you can simply download the mail without having to receive actual paper mail somehow. These services can be hugely helpful, but they mostly won't work to establish your domicile. 

The key word is "mostly." A few services used by fulltime RVers and cruisers have been able to convince officialdom that they are legitimate addresses for domicile. The major ones often provide street addresses in Texas, South Dakota, or Florida and they have many loyal users. One major service used by many sailors is St. Brendan's Isle, providing an address in Green Cove Springs, Florida. I've used them in the past and their service is excellent. Prepare to spend $15-$30 per month for most services. Personally, I would only choose one of these services that is reasonably close to a place I might actually want to visit or bring my boat to. That eliminates Texas and South Dakota for me. I don't want to have to fly to South Dakota just to sort out a driver's license problem!

One way to use these services is to simply have your mail forwarded there using the US Postal Service, but keep in mind that certain things may not be forwardable--often mailings from election boards, tax collectors, and motor vehicle bureaus. In other words, some of your most important snail mail won't get to you via forwarding.

But, the best way to be a round peg is to "simply" find a real street address in a location you want and use that for everything important. Unfortunately, "simply" is not so simple for many fulltime cruisers. This real street address needs to be one where it is safe to receive valuable mail, is checked frequently by someone, won't change, and is not too costly. Obviously, you need to find someone you trust to manage this for you.

What are your options? For many of us, a trusted relative or friend is the first place to look. Who in your family or circle of friends is reliable, unlikely to move, and also takes an interest in your travels and lifestyle so would be willing to support it by lending their address to be your domicile? For long periods of fulltime liveaboard cruising I was lucky enough to be able to use my mother's or father's address for this purpose. I actually paid my mother a regular monthly fee to do this in order to enhance the idea that this was an important arrangement and to somewhat compensate her for the time involved. People are less likely to balk at doing something that is their job. One beauty of this was that my address was a place I would actually visit from time to time, making trips to a motor vehicle bureau or other office easier to manage. I would keep this in mind if you decide to use a commercial mail forwarding service. Make it someplace you visit anyway, or can get to easily when needed. 

If a relative doesn't fit the bill, consider professionals you may use for other things. Possibly you have an accountant, or bookkeeper, or lawyer who takes an interest in your lifestyle and wouldn't mind receiving and occasionally opening and forwarding important mail for you. Be aware that you probably won't be able to use their business address as your residential address since automated systems will detect that--you need a real residential street address! But, someone like a bookkeeper is used to dealing with bureaucracy and government red tape that might be daunting for mom or dad.

An option that some cruisers use successfully is the street address of a marina where they dock or rent a mooring occasionally. Again, a business address may or may not be acceptable for some things like a driver's license, though I suspect you could convince some DMV offices to accept it if you brought a letter from the marina saying you liveaboard there. However, what if the marina sells, or the office manager changes, or maybe they just decide to stop accepting mail when you are on the other side of the world? I wouldn't use this option unless I had a good personal relationship with the people managing the marina. I've noticed piles of uncollected and unforwarded mail in many marinas.

Once you've found the reliable domicile address it is important to use it for every important piece of identifying mail or service: driver's license, U.S. Coast Guard Documentation, boat registration, car registration, insurance, taxes. When you're clearing into another country you want to have everything up-to-date, with matching addresses, and all looking totally ordinary so that nothing gets questioned. Having a regular street address that matches on all your documents helps. For example, I have seen cruisers have problems when the boats document doesn't match the hailing port on the stern or even sometimes the name on the boat. I myself have had problems with state taxes when the authorities assumed my hailing port meant my boat was located there, when in reality the boat had never been there.

This points out another reason you have to weigh all of your address options carefully. Some taxing jurisdictions (notably New York in my experience) are very aggressive at going after perceived tax cheats. Even though the Coast Guard doesn't require you to use a hailing port based on your home address it might make your life easier dealing with certain things like this. It is important to save things like marina receipts, haulout receipts, fuel receipts, etc. to prove where you have actually been if a taxing authority is claiming you owe. On the other hand, we have all seen hailing ports on transoms from places no boat has ever been because the area offers tax benefits. Again, this is a case of making yourself the round peg for the round holes that bureaucracy likes to see. For example, if your boat is actually based in Massachusetts a hailing port in Florida or Delaware might stick out like a sore thumb when the harbormaster is checking who is renting moorings. Certain ports of convenience, like Delaware hailing ports, are red flags that make you subject to even greater scrutiny from the tax man than you might deserve. Bottom line is to pay your taxes where they are due, and avoid the hassle and anxiety of trying to weasel your way out of them.

Sure, you can have non-critical mail sent someplace other than your domicile address, but you are probably better off just eliminating that mail if at all possible. Try to pair down what is sent to your domicile address to only the important stuff. However, no matter how hard you try, junk mail will end up going there eventually. This is another reason you need a trusted person who can review what is coming in and take appropriate action: credit card offers go in the trash or a pile for later forwarding, tax notices need an alert sent to you via email or other means, something like an actual credit card or bank card needs to be saved for when you are someplace you can receive actual snail mail safely.

Life on the water will be easier if you make yourself the round peg for the bureaucrats' round holes!


May 17, 2020

Working Remotely Onboard

Now that everyone has decamped from their cubicles to work from their homes they are beginning to get a taste of what it is like to be a liveaboard worker. Many of us who cruise don't get away from it all as much as we would like because we still have to work to fuel the cruising lifestyle. The good news is that we now live in an era where working remotely is easier and better than ever.

I have done a lot of remote, on-the-road work over the years, and today's Working From Home (WFH) folks don't know how good they have it. I can vividly remember getting a letter (old-school words typed out on piece of paper) forwarded to me in Puerto Rico after a long delay informing me that it was now time to create an index for a complicated book I had written. The process began by combing through the printed version of the manuscript and writing down important words on pieces of paper and index cards. We then had to record on the cards when these words appeared on a particular page. Eventually, I collected all these notes and manually typed them up and mailed them into the publisher.

That gives you just a small idea of what we used to have to deal with when living on a boat and working remotely. Luckily, today we have small and powerful computers onboard, along with Internet available in most harbors. I won't go into how to hook up to the Internet, which is a huge topic on its own, but I have learned a few key things that will help you keep and organize your digital data.

Mostly Cloudy

First, the cloud is your friend. Yes, it is possible to store everything locally on hard drives, USB sticks, and laptops, but don't do it! Of course, you may often be away from an Internet connection so it is important to use those local storage devices, but your ultimate goal is to become as independent from them as possible by uploading everything to the cloud whenever you can.

In my experience, computers die on boats. It is as simple as that. If it isn't physical inundation with salt water, it is the insidious salt air environment. Or the constant motion. Or the laptop flies across the cabin and hits the floor. Or it is stolen when you go to the Internet cafe. Or, or, or. In short, the marine environment is harsh, the boating environment is harsher, the waterfront environment is not much better, and why take the chance you'll lose everything?

Put it in the cloud and in the worst case scenario it will be inaccessible for awhile until you can find another computer, or reach the next Internet cafe, but it will be there waiting for you. Put everything there: photos, music, charts, email, files, whatever.

I read a story last year of someone who had to escape rising water during the Houston hurricane. He didn't have time to grab anything more than the clothes on his back. He was a freelance journalist, but he had stored everything with Google. He ended up sheltering in another state, but was able to purchase a new Chromebook and instantly get back to work from his hotel room. 

That exact scenario could happen to a boater displaced by a hurricane, or maybe your boat just sinks at anchor after catching fire, like happened to some of my friends. They were away diving at the time, and when they returned their boat and all their possessions were just gone. Luckily, someone had pulled their dog from the harbor. Store your digital life in the cloud.

Your Virtual Office

The foundation of this technique is to choose and use one of the online office systems. I recommend using either Google or Microsoft. Google offers free online office tools along with their excellent Gmail. They also offer a professional-grade alternative, called Google Workspace (formerly G Suite), which is very similar to the free stuff, but with one huge advantage--real customer service! Free Gmail and its office apps are great, but if something goes wrong you are on your own. There is no human customer service or help, except via forums that are not monitored by Google. You have to be 100% certain you store your password securely, utilize every alternative security method there is, record your one-time codes, be sure to keep and maintain a phone number, etc. Without these things it is just a matter of time before you lose access to your Gmail account, and then your only hope of getting back in is an automated process that is completely opaque. Many people lose their Gmail accounts!

Workspace's basic tier, at $6 a month, doesn't really gain you much functionality over regular Gmail, but it does give you that very valuable access to real human beings, via phone, email, and chat, that can possibly help you solve problems, and most importantly will work with you when you become locked out of your account.

Microsoft also offers free email and online office apps, and they cover the same bases as Google's: word processing, spreadsheets, presentations (PowerPoint), etc. Plus, they too have a professional grade version that recently underwent some name changes. The deal of the bunch is Microsoft 365 Business Basic at $5 per month with 50GB of email storage and a whopping 1TB of OneDrive file storage. That is one of the best deals going for online storage, even if you don't use any of the other business features. However, the one huge downside for the Office Online products is they aren't usable "offline," meaning when on the boat away from the Internet. If you need Microsoft Office, be sure to also have the desktop versions installed, which are not included with Business Basic. I know, I know, Microsoft makes it confusing.

Both Workspace and various tiers of Microsoft's business offerings provide the ability to utilize your own domain for email, which is very important for professional use. In fact, I recommend it for everybody. It's the best way to be able to create memorable, branded email addresses that you can keep for life. Read more about that here on this blog.

I personally use the free Gmail stuff and I am extremely careful about checking all the security settings, making sure my phone and alternate email address are up to date, and using two-factor authentication. The latter security feature, often abbreviated 2FA (or 2SV for Gmail), means that you not only need a password to get in, but also a code either sent to a cell phone, or created using an authenticator app, or in some cases you can use a separate hardware security key, like the ones made by Yubico. If you set this 2FA stuff up Google will create some one-time codes that will allow you to get back in when 2FA breaks down for some reason. Be sure to store those codes someplace really safe, like an online password manager. I would also write them down on a piece of paper that is stored with things like your passports. Most people would not know what to do with these odd looking codes, so the security danger of keeping them handy is minimal.

But, what about when you're offline, maybe offshore too? Both Google and Microsoft, and Apple too, offer ways to utilize their apps while you are offline, and only when you reconnect with the cloud will everything sync up. In Google's case, the offline versions of Gmail and Docs will automatically sync up with the cloud when you do get back online. I use a Google Pixelbook Chromebook for most of my freelance writing work, and I have found it is the easiest way to manage this process when I am often on the road, on the boat, or on assignment. Being on the boat is really no different than being at home in my office, because I use the same systems in both places, though with different equipment.

By the way, another huge advantage of using Google's online offerings is that you don't even need your own computer to get stuff done--use whatever is available hooked up to the Internet. I was on an island and needed to send something in for work, but there was no Internet cafe or wifi anywhere. Luckily, I knew someone who lived on the island and I was able to use one of his computers from his house to log into my Google account and quickly get some work done.

This is a big topic, and I will be back with more on how to set up your floating office!

March 25, 2020

A Harbor to Ride it Out

With the virus emergency getting worse each day we are beginning to read of communities, islands, regions, and states attempting to shut their borders to outsiders, and those of us who travel by boat know that we are almost always "from away." So, what does a longterm cruiser or liveaboard do during an emergency?

Obviously, if you liveaboard and are in your homeport, you should expect to be treated like a local and receive the same rights along with the same responsibilities. Sadly, this is not often the case in my experience. Liveaboards are considered close to homeless people by some, and if your boat has a hailing port from somewhere else you will be considered to be from there no matter how long you have been tied up in one place. I have purchased boats with various hailing ports, and without fail we are assumed to be from the location featured on the stern.

This can really hit home when you try to move about and your out-of-state driver's license doesn't cut it with the local police. Is your health insurance local to the state you are in? Where is your doctor located? Do you own a car with out-of-state plates? All of a sudden you find your clever parsing of state laws in order to avoid paying some tax or another might not have been the best idea. In short, if you plan on living aboard in one locality for long, make it your real home (your domicile) for tax purposes, and follow all the local regulations for drivers' licenses, car registration, etc.

Then there are the cruisers who are truly transient, moving from place to place, with no real fixed "homeport." Don't be surprised if you find yourself at the nasty end of pointed questions with regard to your hailing port or the flag you are flying. In times of crisis people become very tribal and rightly or wrongly defend their home turf. Most of us would do the same. Think of how you would feel if the positions were reversed--you're looking out from your waterside home and see a boat arriving with a hailing port known to be a hotbed of the virus. Your boat and you may not have been in your hailing port for months or years, but that is where you are assumed to be from. Ask anyone driving around the country with New York license plates what type of reception they are getting right now.

Port in a Storm

So where can a cruiser go when the world is shut down? One huge advantage we have is the ability to carry lots of longterm stores, water, and fuel. Cruising boats are perfect for self-isolation in many ways. The virus doesn't travel far, and if you are anchored out or on a mooring you are unlikely to have much contact with anyone carrying the virus.

In some ways, being on a long passage might be the ideal spot to be, personally, but eventually you have to find a port that will allow you in, and some may not. Avoid heading offshore for that reason. You won't know where you will be able to end your voyage safely, and you don't want to find yourself ordered to quarantine in some horrible commercial port.

Many of us have certain ports we have visited over and over again because we love them, and possibly have friends who live there. Those friends ashore could be your key to finding a safe port in a storm. With the local tribe hunkering down and trying to prevent an influx of outsiders you need that inside help. The close friend ashore might make a huge difference if you need assistance such as needing a car to get groceries or medicine. Also, those local friends will know others that you might need help from: the local mechanic, the police, the health clinic, the harbormaster.

However, often you will be far away from that favorite port with the friends ashore, so what should you look for in a safe harbor? The #1 feature, I believe, is to head to a port that is boat friendly. You want to be in a place used to seeing lots of cruisers coming and going from all around the country and the world. That type of harbor also has lots of local boaters who may themselves have been cruisers at one time or another. Those people ashore will know what you on your boat need, and chances are very good the local officials will know and understand what you are doing.

Ports in the USA that fit this description include Newport, Rhode Island, Annapolis, Maryland, and Fort Lauderdale, Florida. These places already have hundreds or thousands of boats tied up with hailing ports from everywhere, and chances are great that you and your boat will be able to instantly "fit in." In a place with lots of fellow boaters you will quickly become part of the local tribe. The customs officials will understand, the harbormaster will understand, the police will understand, and many local people will understand. You want to be in a place with robust services of all sorts, including transportation. You want a port where you could leave your boat indefinitely if you had to.

Choose a port that is on the mainland so there are good connections via road, train and air. Good transportation connections mean your purchases at the local supermarket won't be a burden on the system. Needed supplies should still be plentiful. You'll be able to purchase fuel for the boat, get water easily, find repair parts.

I have been lucky enough to live in some of these places, and I have visited them by boat many times. Yes, they are busy, and services are not always the cheapest, but there has always been an understanding that cruisers are welcome. Cruisers are part of the lifeblood of these major ports, and therefore you are appreciated for what you bring to the local economy.

Plus, they tend to be fairly large communities, with much more robust healthcare systems. That lovely, isolated island in Maine or the Bahamas may be a great place to get away from it all, but it probably has very limited medical capacity during normal times, if any. During a pandemic people from away will not be welcome when a single additional person burdening the healthcare system could mean life and death for someone who lives there year-round.

It may seem counterintuitive to some, but now is not the time to head to an off-the-beaten-path place. Those are the very places that are terrified of outsiders right now, and rightfully so, because each additional newcomer has the potential to bring the virus with them or to become a burden on local limited resources. 

This is a time to stick together and be in a place where all around you are other boaters just like you. You won't stick out, you will fit in.

February 1, 2020

A Year on the Island Part 2

Having mostly visited the island by boat previously, I had not explored many parts of the island away from the major harbors of Vineyard Haven and Edgartown. There is so much to see and do, if you love nature, that I still feel I have only scratched the surface after a year.

There are innumerable trails, short and longer, all over the island and only a short ferry ride away on Chappaquiddick. Many start off in a beautiful forest only to end up on a sandy or rocky beach. There is something very special about a hike that combines woods and water.


Some days, winter or summer, we just walk along one of the many gorgeous beaches. In the summer popular places will be swarming with bathers and sun worshipers, but in the winter you may be the only person on miles of beach. In any season you can eventually find your own quiet spot to just listen to the waves and wind, or to lie down and soak up some sun. There is no more relaxing exercise than walking on a beach.


Having tired of wandering off the beaten track it is always just a short drive or bike ride to one of the small towns. Each one has its own interesting businesses and restaurants, though many close in the winter. It's always a good idea to call ahead during the off season.


Those without cars can still explore almost every corner of the island using the excellent VTA buses. For such a small island the service is amazing! When I first moved here I lived car-free for about 6 months and really didn't miss much. The main difficulty was obtaining wine and beer, which are heavy to carry and only available in limited locations--none for sale except with a meal in Vineyard Haven! 


Before I had a car, I would just rent one when venturing off island. There is a convenient car rental reachable by shuttle bus at the ferry parking lot in Falmouth. Not having to make a reservation for your car means you can just walk onto any ferry, saving lots of hassle and money. During the summer car reservations are hard to come by, and many people book in January for July trips. I also have a motorcycle, which has the advantage (besides being fun to ride!) that you can almost always slip onto a ferry. Same with bicycles.


Of course, all of these ferry trips to escape to the mainland add up in cost, making for a substantial line item on many budgets. Since Sail MV is flat out in the summer, I rarely get off island during the peak travel times, but then in the fall, winter, and spring I have to time ferry trips around bad weather. Last October we couldn't get off the island for three days during a gale, and my son was on the verge of missing a flight when we finally did make it. Just one of the peculiarities of island life!

January 18, 2020

A Year on the Island Part 1

I've now lived and worked on Martha's Vineyard for a year, and here are some thoughts on island living.

I began my job as executive director of Sail Martha's Vineyard in January 2019. Finding a place to spend my first six months on the island was a hurdle due to higher prices than nonprofit salaries support, and lack of available rental housing. Due to its summer popularity there are tons of homes on island that are unoccupied most of the year, but most people don't rent for the "off season."


With the help of Sail MV's board of directors, I found a wonderful rental in Vineyard Haven that was right on the harbor and within walking distance of the office. I feel privileged to have been able to live there, despite the lack of insulation in the historic home and subsequently enormous propane bills.


The cost of heating was my first introduction to what I call the "island tax." Everything sold on an island must cross the water by ferry or plane, and that adds something to the bill. Unfortunately, some on the island add a further percentage due to the pervasive expectation that everything will be more expensive than just a few miles away on Cape Cod. Therefore some purchases are maybe only 10% more, while others are 50% more.


This leads to the favorite island technique of ordering needed stuff via Amazon and others that offer free delivery, even to the island! You would think that would be a total win until you end up waiting in a 30-minute line at the post office with all the other people collecting their stuff. Many addresses on the island do not have postal delivery, and many others are so obscure that expecting UPS or Fedex to get there is overly optimistic. Everyone, has both a PO Box and an alternate shipping location it seems. You often see boxes stacked up alongside a metal mailbox on a rural road. The mailbox is for some house off in the woods down a dirt road.


My particular street address is not even recognized by the power company. Instead, they have assigned me an unused address on another nearby road. My cellphone provider also refuses to recognize the address, despite it being the legal, town-recognized address for the building. It isn't recognized by UPS or Fedex either. Needless to say, it is hopeless having anything sent to the address--who knows where it would end up? So, my mail and any shipments go either to my PO Box in another town, or to my work address where UPS is able to find us! However, no mail can be delivered to the work address, so I often walk to the post office at lunch time. This is all "island normal." Luckily, the local RMV (the Massachusetts equivalent of the DMV) understands all this and is accommodating.


Another interesting thing about island life--no crime! Well almost nothing. When something does happen it becomes front page news on the two excellent island newspapers. However, the police forces are designed for the summer influx of tourists, so they are overstaffed with not much to do most of the year. Be careful not to speed on any of the deserted back roads or park your car someplace it shouldn't be or you may encounter one of the local police patiently waiting for something to do. However, they do it in a very friendly manner!


Those two excellent island newspapers mentioned above are treasures that most of the USA has lost. I subscribe to both, paper and digital, because they are really critical to knowing what is happening. Reporters are at every town meeting, and know everyone on the island. They both have experienced reporters that have been here long enough to know the territory well. It is a pleasure to read their daily email and online stories and to sit down with the weekly papers.


More to come!

November 10, 2018

Internet Bliss

While enjoying my usual evening libation in the cockpit, I often grab a cellphone or laptop to find out what is happening in the world, what messages may have come in that I can ignore, and whether or not thunderstorms are likely to wake us at the usual 2 a.m. With the wonders of Wi-Fi and cellular phone service, these joys/chores of modern life have become necessities for most cruisers, and there are many ways to achieve the state of “connected” bliss on board.

For many boaters, regular cellphones and Wi-Fi-enabled laptops (and other devices) provide plenty of connectivity when close to shore and in marinas. While coastal cruising from Maine to Florida, I am frequently within good cellphone coverage — even over to the Bahamas. Yes, there are big gaps at times, but I can survive for a few hours without checking Twitter. Almost every marina has Wi-Fi, and if they don’t, there is bound to be an Internet cafe or other public Wi-Fi nearby. I’ve run into Wi-Fi in the weirdest places far off the beaten track, like on a cay in the Bahamas with no regular phone service — but it had satellite Internet and TV!

However, many others feel the need for stronger data connections and will utilize marine Wi-Fi and cellular receivers that can feed an onboard Wi-Fi router. This can mean the difference between enjoying a quiet night of Facebooking while anchored securely in the middle of the harbor vs. schlepping a laptop ashore in search of a signal. However, the days of “stealing” free Wi-Fi from unsuspecting shoreside homeowners and businesses with unsecured networks is largely over. Though it is still possible to be a data thief, you can’t count on it for reliable service.

Obtaining a legitimate data connection that can supply the speeds and reliability you need means a combination of Wi-Fi and cellular phone data when coastal cruising. In some harbors, there are public Wi-Fi signals that reach out over the harbor, and in others you may be able to get permission and/or pay a fee to a nearby marina. But, Wi-Fi is limited in range and there are many security concerns. Unfortunately, Wi-Fi is relatively  hackable and you should read up on how to secure your data connections, possibly by using a VPN.

Typical home Wi-Fi routers have about a 150-foot range indoors and possibly up to 300 feet outdoors, depending on what’s between you and the router. Marine Wi-Fi receivers with large antennas that can be mounted on a high point above deck obstructions will receive at greater range.

With a dedicated marine Wi-Fi receiver, you can expect much improved performance over any regular Wi-Fi receiver in a portable device, however coverage and range in the real world will be highly variable. I have seen brochures for marine receivers that claim “up to seven-mile range,” and some claim to reach up to 12 miles offshore, which is meaningless since a lot depends on the originating source. If you just need a strong signal on your home mooring or in a marina and know what networks you want to connect to, a marine Wi-Fi receiver may be a great solution for you.

While cruising in unfamiliar waters, you will have the problem of sorting through all the available Wi-Fi networks to find the ones that allow you to connect and provide the service you need. That problem is made more difficult by all the other boats in the harbor broadcasting their own wireless networks. The other night, I was located well offshore in a harbor on a small island that I know has only one public Wi-Fi network, yet a quick look at my phone showed many of the boats around me were broadcasting signals that were much stronger than the public Wi-Fi service in my location. I didn’t try, but I assumed that most of those other boats had their networks properly password protected! I’ve used the public service before and know that it is expensive, slow and unreliable. The best Wi-Fi receiver won’t be able to solve that problem for you.

Cell your soul
The most reliable option, at least within the U.S., is receiving your data via a cellular phone network. Cell signals offer much greater range that can extend many miles offshore. I have found that phone company coverage maps often underestimate coverage on the water, since they probably do little testing out there. Ordinary mobile phones are often quite effective within a mile or two of much of the U.S. East Coast. Again, there are significant gaps in coverage, depending on your carrier of choice, but in general you will find a good cell signal more often than you will find good Wi-Fi, particularly when underway. Hopping from one Wi-Fi network to another is a study in frustration, but maintaining a decent cellular signal all day long is a regular occurrence for boaters in many parts of the country. In other areas of the world, your service and choices may vary greatly.

Security is much better on the cellular networks than it is on Wi-Fi, and I have also found that it is much more reliable during inclement weather. When the power goes out ashore, most of the Wi-Fi networks go down too, but usually the cell service stays up and running. This can be a tremendous safety factor during hurricanes and lesser storms, when communications may be critical. At the very least, it is great to be able to call home or send an email to let everyone know you have weathered the storm. It is also great when you need to find parts, contact your insurance company or transfer some funds when all of the ATM machines ashore go dark.

All the major mobile carriers offer unlimited data plans, as do many prepaid carriers. Data-only plans are available too, but they may not be a better deal than a traditional phone plan. Unfortunately, the word “unlimited” doesn’t really mean limitless amounts of high-speed data, so read the fine print. However, for many of us, an unlimited cellular plan is cost effective and provides the greatest real-world data coverage.

For some boaters, a good option is to combine Wi-Fi service with cellular coverage via your phone when needed. You can “tether” other devices to your phone in order to utilize the phone’s data plan. In general, this is not for extended or heavy data usage, but it can be a great option if you just need to use your laptop for something that the phone can’t do. The other day my son downloaded a new book to his Kindle by tethering to his cellphone. One thing to keep in mind is that tethering seems to deplete your phone’s battery faster than ever.

The best of both worlds
Luckily, there are now single devices that allow you to have great Wi-Fi range when you want it and great cellular coverage when you need it. For example, the weBBoat 4G Plus by Glomex includes a 4G LTE cellular antenna and a Wi-Fi antenna, with automatic switching between antennas based on signal quality. It accepts two SIM cards, allowing you to utilize different cellular providers depending on cost, location, etc. Up to 32 devices can be connected on board at once. The antenna unit looks like a small satellite dome and can be mounted in a high spot free of obstructions. Glomex claims you can get reception “up to” 20 miles offshore. Again, your experience may vary, but you typically won’t find reliable signals at maximum range.

One interesting thing to consider is that Glomex notes that your onboard Wi-Fi signal, broadcast by the weBBoat unit, can be significantly degraded on metal boats, so it is possible to connect up to four Wi-Fi router/access points to the unit. You can also connect to LAN ports using an Ethernet cable.

Average power consumption is listed at 150 mA, and it will work on 10 to 30 volts DC. Retail price is $995, which seems reasonable considering all the various components included with the system. It is easy to spend well north of $200 when purchasing just a regular consumer/landlubber-grade, shoreside Wi-Fi router for your apartment.

It would be possible to use land-grade Wi-Fi routers on board too. I took a look at my reasonably up-to-date home Wi-Fi router, made by Linksys; the power adapter puts out 12 volts and the unit needs up to 2 amps. The Linksys could run off an ordinary boat’s 12-volt system, though battery drain would be significant if utilized 24/7. However, it might be an option to improve your onboard Wi-Fi coverage when in a marina or other location with Internet access and the ability to keep your batteries charged up.

Shakespeare Marine makes some units that are very similar in function to the Glomex models. The WebWatch WC-1 and WCT-1 also look like miniature domed satellite receivers, and they offer both increased Wi-Fi reception at great ranges and 4G/LTE reception on the cellular networks. The WCT-1 sports a built-in HDTV receiver, which could be quite useful in coastal waters. HDTV coverage near major U.S. cities can be quite good, and some report better picture quality than when using cable TV. Of course, channel selection will vary from place to place. I have found that TV weather stations are often quite useful when carefully watching the approach of distant tropical systems.

The Shakespeare units operate on 12/24 volts, with a 1 amp max draw. Pricing is in the vicinity of the Glomex units.

Shakespeare also sells their JellyFish JF-3 Classic Multi-Band Antenna, which appropriately looks like a jellyfish due to its domed antenna enclosure sporting three different cables to support the GPS, cellular and Wi-Fi antennas. This unit is a passive antenna, meaning it does not require a power input for amplifying signals, and it does not broadcast an onboard Wi-Fi signal. The cellular and Wi-Fi cables do not sport standard Ethernet connectors, so you will have to cobble together a way to supply an onboard Wi-Fi router or connect to a particular device.

Note that you can also purchase inline signal boosters that will work with various passive marine cellular antennas, but those aren’t the focus of this article on all-in-one solutions to getting your selfies online!

Catch a wave
Wave WiFi is another company offering an almost-all-in-one solution incorporating cellular and Wi-Fi antennas, but the output is a regular Ethernet cable that can be connected to an onboard laptop or separate router. Utilizing a standard Ethernet cable makes connecting to all sorts of non-marine devices much easier, potentially lowering costs. However, many devices require a Wi-Fi signal, which is the beauty of the all-in-ones noted above.

Onboard networking providers

Digital Yacht
digitalyachtamerica.com/

4G Yacht
www.4gyacht.com/marine-internet

Glomex
www.glomex.us

Shakespeare Marine
shakespeare-ce.com/marine/

Wave WiFi
www.wavewifi.com/

Winegard
www.winegard.com/connect/marine

Well known in the RV world, Winegard is now offering a marine unit that looks interesting and is less expensive than most. The Winegard ConnecT 4G1xM combines a Wi-Fi extender with a built-in cellular data antenna and router. A Winegard cell data plan (on the AT&T network) is required for 4G access. With no contracts, monthly data plans start at $20 for 1GB, and you can get 20GB for $150. Unlike the Glomex and the Shakespeare units, the Winegard utilizes an array of five short vertical antennas with no surrounding dome. The unit includes Ethernet ports and broadcasts a local Wi-Fi signal for your boat. Power requirement is 9 to 16 volts at up to 1 amp. List price is $479.

With its relatively costly data plan and the inability to use your own mobile SIM, the Winegard units might be good for those that mostly stay around Wi-Fi with the occasional cruise to more distant waters — hopefully places with good AT&T coverage. Since there is no contract, 4G data could just be purchased when needed.

Less is more
I am not usually a fan of integrating functions on a boat, which can create a single point of failure that takes out multiple necessities. However, in the case of Wi-Fi and cellular data, there are many benefits: fewer power supplies, fewer cables, fewer antennas to site and mount, fewer holes to drill for wire runs, fewer holes to waterproof and fewer controls to manage. Many of these devices are monitored and controlled using smartphone apps. And, your smartphones on board provide the ideal and very usable backups for the single-point-of-failure devices.

Other smartphone apps can assist with the proper installation of an all-in-one unit. For example, I have found that Wi-Fi scanning apps are a great way to test out router positions. You may be surprised by how you can dramatically improve signal strength by relocating a router. Also, phones can be used to help you find open and/or pay-to-use Wi-Fi access points that may require you to send in credit card information or sometimes to call for support.

Having a radar arch bristling with antennas, domes, wires and other electronics can make your boat look like a serious world cruiser, but reducing windage and complication back there might improve your real voyaging experience. And, you’ll be able to watch cat videos while offshore!

This article was originally published by Ocean Navigator in the November/December 2018 issue.